These bar feeds offer the simplicity of others on the market today with more standard features:
- End of bar switch pre-wired with plug for quick interface with OmniTurn lathes
- Roller pusher nose is now standard - 29" long, special longer lengths are available for over 29"
- Powder coated finish for long life
- End of bar switch - standard
- Bar hooks - standard
- Water trap and lubricator
- Pressure gauge
- Flow control
- Kill switch
- Made in America - FOB Grants Pass, Oregon
Bar feed tubes can be changed as needed for different material sizes and lengths.
Part # |
Description |
| PN-7258 | 6' x 5/8" |
| PN-14458 | 12' x 5/8" |
| PN-72116 | 6' x 1-1/16" |
| PN-144116 | 12' x 1-1/16" |
| PN-BT-7258 | 6' x 5/8" tube only |
| PN-BT-14458 | 12' x 5/8" tube only |
| PN-BT-72116 | 6' x 1-1/16" tube only |
| PN-BT-144116 | 12' x 1-1/16" tube only |
| 1. Locking arm for tube
2. Air pressure switch - on 3. End of bar switch 4. Flow control regulator 5. Oiler - lubricator 6. Pressure control 7. Air switch - off |
 |
| 8. Height adjustment
9. Bar hooks |
 |
| 10. End of bar switch connections |  |
|
 |
|||||||||||||||||
