OmniTurn Cutting Tools
AccuTrak Knurling on OmniTurns
Capacity: .19 to 1”
Head width: 2.45”
Head thickness: .875”
Die size: 3/4” dia, 3/8” wide, 1/4” hole
The holder uses two knurling dies held in an adjustable yoke. It is easy to center the holder so there is even pressure on both dies. The adjustment for size is done with a screw.
AccuTrak Knurl Holder
with 5/8" shank

Other sizes and styles are available, contact us for a complete catalog.

Download Tooling and Accessory Catalog
Go to Online Store

Straight Tooth Knurls -

TPI / Teeth TPI / Teeth TPI / Teeth TPI / Teeth
8,19 (90°) 20, 23 (90°) 12, 28 (90°) 14, 34 (90°)
16, 38 (90°) 20, 47 (90°) 21, 50 (90°) 25, 59 (90°)
30, 71 (90°) 33, 77 (90°) 35, 82 (90°) 40, 94 (90°)
35, 82 (70°) 50,117 (70°) 60,141 (70°) 80,189 (70°)
TPI / Teeth TPI / Teeth TPI / Teeth TPI / Teeth
8, 16 (90°) 10, 20 (90°) 12, 25 (90°) 14, 34 (90°)
16, 33 (90°) 20, 41 (90°) 21, 50 (90°) 25, 51 (90°)
30, 61 (90°) 33, 77 (90°) 35, 71 (90°) 40, 81 (90°)
50,102 (70°) 80,163 (70°)
30° Diamond Knurls - Male or Female

TPI / Teeth TPI / Teeth TPI / Teeth TPI / Teeth
12, 25 (90°) 16, 33 (90°) 20, 41 (90°) 25, 51 (90°)
30, 61 (90°) 40, 81 (90°) 50,102 (70°) 80,163 (70°)